How to Press Your HALO26 DTF Transfers
Use these press settings as your starting point for bright, long‑lasting prints. Always test on your own press and garment first.
Press Settings
- Temperature: 320°F
- Time: 8–10 seconds
- Pressure: Medium to firm
Peel & Finish
- Peel: Hot peel – remove carrier immediately and smoothly
- Optional: Quick 2–3 second repress with parchment or Teflon for a softer finish
Pro tip: Every press runs a little different—adjust temp, time, or pressure slightly until you dial in the sweet spot for your setup.
DTF TRANSFERS ONLY